Structural Design and Construction Management with Sustainability MSc
Why choose this course?
This course focuses on the challenges and opportunities facing the concrete industry in meeting the demands of sustainability. You will examine concrete technology, sustainable construction, earthquake engineering, steel and concrete building design, fire assessment, geo-environmental engineering and construction management. You will take part in practical work, group work, case studies and presentations. Experts at leading civil engineering and construction companies contribute to the course. For your dissertation, you may choose an industry-relevant project to research.
| Mode | Duration | Start date |
|---|---|---|
| Full time | 1 year |
September 2023 January 2024 |
| Full time | 2 years including professional placement |
September 2023 January 2024 |
| Part time | 2 years |
September 2023 January 2024 |
| Full time | 1 year | September 2024 |
| Full time | 2 years including professional placement | September 2024 |
| Part time | 2 years | September 2024 |
| Location | Penrhyn Road |
Reasons to choose Kingston University
- This course is fully compatible with the Government and Foresight Strategy on Sustainable Construction.
- This course offers specialised knowledge and skills that will enhance your employability.
- The course meets the requirements for Further Learning for a Chartered Engineer (CEng) if you already have an Accredited CEng (Partial) BEng (Hons) or an Accredited IEng (Full) BEng/BSc (Hons).
Accreditation
Joint Board of Moderators
Further learning programme – MSc
This degree is accredited by the Joint Board of Moderators (JBM), comprising the Institution of Civil Engineers, Institution of Structural Engineers, Institute of Highway Engineers and the Chartered Institution of Highways and Transportation, on behalf of the Engineering Council, as meeting the requirements for Further Learning for a Chartered Engineer (CEng) for candidates who have already acquired a partial CEng accredited undergraduate first degree.
It should be noted that candidates completing the MSc who hold an underpinning accredited IEng degree or a non-accredited bachelor degree will need to apply for an academic assessment to determine whether they will meet the educational base for CEng registration.
Our MSc course in Structural Design and Construction Management with Sustainability is accredited until 2023 entry.
See www.jbm.org.uk for further information.
Accreditation is a mark of assurance that the degree meets the standards set by the Engineering Council in the UK Standard for Professional Engineering Competence (UK-SPEC). Some employers recruit preferentially from accredited degrees, and an accredited degree is likely to be recognised by other countries that are signatories to international accords.
Please check the Engineering Council website for more information.
What you will study
The hands-on course focuses on the challenges and opportunities for the concrete industry in meeting the demands of sustainability. It combines concrete technology, sustainable construction, earthquake engineering, fire assessment, geo-environmental engineering and construction management.
The structural design in concrete module is assessed by coursework based on the national university competition organised by The Concrete Centre, the trade body representing the concrete industry in the UK.
For a student to go on placement they are required to pass every module first time with no reassessments. It is the responsibility of individual students to find a suitable paid placement. Students will be supported by our dedicated placement team in securing this opportunity.
Modules
Optional placement year
Core modules
Management of Project Risk, Quality and Safety
30 credits
The module starts with a general introduction into the management of projects, and then goes more deeply into the technical aspects of project management techniques and project risk analysis.
It also covers many aspects of health and safety legislation and practice, starting from the history of health and safety in the UK, the Health and Safety at Work Act, risk assessment, and covers major sets of regulations that impact on construction work. The Construction (Design and Management) Regulations are dealt with in depth, as this is a key piece of statutory legislation that relates to the construction industry. Good practice and the importance of advice and guidance are emphasised.
Quality management is dealt with in relation to the requirements of the latest edition of ISO9000, and the process leading to registration under this standard. Modern practices in quality and the use of various quality management techniques are covered.
Seismic Design of Structures and Substructure Design
30 credits
This core module covers the conceptual design and detailed design of concrete framed buildings subjected to earthquake in accordance with Eurocode 8 (EC8). The module also covers the design of reinforced concrete substructures and foundations to Eurocode 7 (EC7) including soil-structure interaction, cyclic loading and sustainability issues.
On successful completion of the module, you will be able to:
- Carry out conceptual design, seismic analysis and detailed design of concrete framed buildings to EC8.
- Critically analyse technical structural requirements and recommend credible practical solutions for concrete structures subjected to earthquake induced loading including repair and strengthening of earthquake-damaged structures.
- Analyse and design shallow footings, rafts and special foundations using numerical methods in accordance with EC7.
- Assess the loaded behaviour of single piles and pile groups including settlement prediction for both short term and long-term conditions.
- Analyse the stability and deformation of various geotechnical elements subjected to seismic loading.
- Discuss and interpret environmental as well as practical issues related to geotechnical construction.
Structural Design in Concrete and Steel
30 credits
This core module covers latest developments in specification, design and detail of reinforced and pre-stressed concrete framed buildings and, steel framed structures. Methods of analysis and structural design are in accordance with Eurocode 2 (EC2) and Eurocode 3 (EC3) for concrete and steel respectively.
On successful completion of the module, you will be able to:
- Analyse, design and detail reinforced and pre-stressed concrete elements including flat slabs and post-tensioned slabs to EC2.
- Carry out the conceptual design including design for stability and robustness of multi-storey concrete framed buildings.
- Specify sustainable modern concretes including self-compacting concrete, high strength concrete, admixtures and additions, in accordance with up-to-date practice.
- Critically compare various methods of design with steel such as simple, continuous and semi-rigid and carry out plastic analysis of steel frames.
- Analyse, design and detail incl. fire resistance requirements of steel elements such as beams, columns and composite floors to EC3.
- Design single and multi-bay industrial structures in steel including bolted and welded connections.
Estimating, Tendering and Procurement
30 credits
This module concentrates on the way the construction product is priced and paid for and aims to give an in-depth understanding of the roles that the client/employer, the main contractor, and the professional service consultants have in relation to the procurement of construction works.
It also examines the processes that need to be undertaken at senior management level in terms of the estimating and tendering decisions by contactors' during the bidding process. It analyses in detail the strategic decision-making rationale that needs to be put in place when making a decision to tender a bid, and the process of turning an estimate into a tender submission.
Dissertation
60 credits
The overall aim of the module is to allow you to develop research skills and gain an appreciation of a subject area of your own choosing. In undertaking the work that is required you will be able to demonstrate knowledge and competence in reviewing existing published literature and data and through the use of your own efforts apply one or more of a range of research methods to collect and analyse data and draw well-founded conclusions as a result of your research.
The module allows you to study an area of interest in significant depth and allows you to demonstrate a clear understanding of what has been learnt through a variety of means – a literature review, a research proposal, an oral presentation and a substantial dissertation.
Sustainable Construction and Substructure Design
30 credits
This module is a core module examines the environmental, social and economic principles of sustainability relevant to concrete construction and covers robust sustainable practice including associated regulatory framework and initiatives. The module also covers the design of reinforced concrete substructures and foundations to Eurocode 7 (EC7) including soil-structure interaction and cyclic loading issues.
On successful completion of the module, you will be able to:
- Identify and define the principles of sustainable concrete construction, and explain associated practical implications.
- Review environmental, social and economic impacts of concrete and specify concrete constituents, production techniques and construction methods for durable and sustainable concrete structures & substructures.
- Identify, define and apply regulatory provisions and newly introduced initiatives for sustainable concrete engineering practice.
- Analyse and design shallow footings, rafts and special foundations using numerical methods in accordance with EC7.
- Assess the loaded behaviour of single piles and pile groups including settlement prediction for both short term and long term conditions.
- Analyse the stability and deformation of various geotechnical elements subjected to seismic loading.
Optional modules
Professional Placement
120 credits
The Professional Placement module is a core module for those students following a masters programme that incorporates an extended professional placement. It provides students with the opportunity to apply their knowledge and skills in an appropriate working environment and develops and enhances key employability and subject specific skills in their chosen discipline. Students may wish to use the placement experience as a platform for the major project or future career.
It is the responsibility of individual students to find and secure a suitable placement opportunity. This should not normally involve more than two placements which must be completed over a minimum period of 10 months and within a maximum of 12 months. The placement must be approved by the Course Leader, prior to commencement to ensure its suitability. Students seeking placements will have access to the standard placement preparation activities offered by Student Engagement and Enhancement (SEE) group.
Read more about the postgraduate work placement scheme.
Work placement scheme
Many postgraduate courses at Kingston University allow students to do a 12-month work placement as part of their course. The responsibility for finding the work placement is with the student; we cannot guarantee the work placement, just the opportunity to undertake it. As the work placement is an assessed part of the course, it is covered by a student's Student Route visa.
Find out more about the postgraduate work placement scheme.
Work placement scheme
Many postgraduate courses at Kingston University allow students to take the option of a 12-month work placement as part of their course. The responsibility for finding the work placement is with the student; we cannot guarantee the placement, just the opportunity to undertake it. You may find securing a professional placement difficult as they are highly competitive and challenging, but they are also incredibly rewarding. It is very important to prepare and apply yourself if this is the route you wish to take. Employers look for great written and oral communication skills and an excellent CV/portfolio. As the work placement is an assessed part of the course, it is covered by a student's Student Route visa.
Find out more about the postgraduate work placement scheme.
Entry requirements
Teaching and assessment
Who teaches this course?
The course is taught by the Department of Civil Engineering, Construction and Surveying. Staff have a wide range of experience across research and industry and continue to practice and research at the cutting edge of their discipline.
Our programmes have been designed with your aspirations, needs and abilities in mind, and are aimed at developing your specialist skills, deepening your understanding and gaining new insights and perspectives to equip you for a professional career ahead.
Academic staff in the department are bonded in an interdisciplinary team of civil and structural engineers, material scientists, geologists, hydrologists, construction managers, building and quantity surveyors with professional practice and applied research backgrounds. Many of us are nationally and internationally recognised leaders in our areas of specialism and we are frequently invited to undertake high-profile external research and consultancy work.
Having developed our courses with the working world in mind, we offer hands-on student experiences such as testing in our exemplary laboratory facilities in structures, materials, concrete, geotechnics and hydraulics that are used for teaching and research. Knowledge is also gained from field trips for both undergraduates and postgraduates; site visits and industrial placements; employability support via our strong partnerships with industry, professional institutions and learned societies.
Our teaching is engaging and practice-focused and supported by site visits and invited guest lecturers by our industrial liaisons and strong alumni network. Our approach to assessment is project-driven and seeks to equip students with a range of competencies and transferrable skills thus boosting their employability prospects.
Postgraduate students may run or assist in lab sessions and may also contribute to the teaching of seminars under the supervision of the module leader.
Fees for this course
Here you can find more details about fees for this course, as well as any funding opportunities available to you for this course. Please note that fees relate to the academic year in question and will increase in future years.
If you require a Student Route visa to reside in the UK you will not be able to enrol on a part-time programme at the University.
Additional costs
Depending on the programme of study, there may be extra costs that are not covered by tuition fees which students will need to consider when planning their studies. Tuition fees cover the cost of your teaching, assessment and operating University facilities such as the library, access to shared IT equipment and other support services. Accommodation and living costs are not included in our fees.
Where a course has additional expenses, we make every effort to highlight them. These may include optional field trips, materials (e.g. art, design, engineering), security checks such as DBS, uniforms, specialist clothing or professional memberships.
Our modern teaching environment
There is a wide range of facilities for practical work at our Penrhyn Road campus, where this course is based. You will have access to a modern environment with the latest technology and industry-standard equipment, including:
- extensive materials and structures facility for concrete, masonry, steel and timber
- geotechnical and hydraulics testing facilities
- surveying equipment, such as satellite global-positioning systems
Dedicated computer-aided design facilities include:
- a range of CAD/CAM packages, such as Ideas, SolidWorks and AutoCAD
- finite element analysis
- computational fluid dynamics
- virtual instrumentation
What our students say
Somesh Ainapur
MSc Structural Design and Construction Management with Sustainability (2022)
After you graduate
Where this course will take you
The market for sustainable construction management is continually evolving. Graduates from this programme will be prepared for senior technical and managerial positions in both private and governmental sectors, including:
- civil/structural engineer
- concrete technologist
- materials engineer
- technical manager
- designer/ consultant
- project engineer
- construction engineer
- sustainable construction manager
- systems engineering consultant
- project manager
Careers and recruitment advice
The Faculty has a specialist employability team. It provides friendly and high-quality careers and recruitment guidance, including advice and sessions on job-seeking skills such as CV preparation, application forms and interview techniques. Specific advice is also available for international students about the UK job market and employers' expectations and requirements.
The team runs employer events throughout the year, including job fairs, key speakers from industry and interviews on campus. These events give you the opportunity to hear from, and network with, employers in an informal setting. For example, in the picture here students are practising their interview skills with real employers at a 'speed interviewing' event on campus.
What this course offers you
- This programme builds on the research excellence in sustainable concrete construction at Kingston University and is fully compatible with the existing Government and Foresight Strategy on Sustainable Construction. It is run in association with The Concrete Centre UK.
- Input from experts at leading civil engineering, construction and related companies complement the academic teaching. This enables you to develop a wider perspective and understanding of the worldwide issues facing the construction industry.
- Each module combines a stimulating mix of lectures, practical laboratory work, group work, case studies and presentations.
- You will have the opportunity to undertake research and industry-relevant dissertation projects.
- The course will also develop your professional, analytical and management skills, as well as improving your technical skills and knowledge. For example, you will gain communication, teamwork, IT and problem-solving skills.
- You can choose to study the course full-time or part-time to fit in with work commitments. September and January start dates give you extra flexibility plus the programme is modular, with the majority of the modules delivered over one week.
- We regularly review all our postgraduate courses to make sure that they are up-to-date, reflect industry needs and are comparable to other university courses. This programme was developed in consultation with the leading industrial specialists and will be delivered in association with the Concrete Centre-UK.
Links with business and industry
How the engineering staff work with industry partners
Our excellent industrial links have developed over many years and throughout many countries. Some examples include work with:
- Matra-Marconi Space Ltd;
- Ericsson;
- Balfour Beatty;
- The National Health Service; and
- British Gas.
Our Industrial Advisory Committee reviews and advises industrial activities. The Committee acts as a forum for discussing teaching, research and consultancy to industry.
Research areas
Engineering research
Many academic staff are engaged in a range of research and consultancy activities funded by the Research Councils, the European Union, the government, trade unions and industry. These activities ensure our staff are in touch with the latest industry thinking and bring best practice to your studies.
Research centres
Engineering research within the Faculty is organised into three research centres, which provide focus and encourage the cross-fertilisation of ideas.
Civil engineering and construction research takes place in the Sustainable Technology Research Centre. The research groups within the centre cover a wide range of topics, including:
- land use
- building design and construction
- re-cycling waste materials
- efficient energy use and distribution
- water resources (hydraulics)
- monitoring using remote sensing
Extra activities for this course
There are always interesting activities taking place at Kingston and exciting opportunities to take advantage of.
Our lively research culture is reflected in our regular seminars. Recent examples include:
- International Conference on Autoclaved Aerated Concrete;
- Recent Advances in the Micromechanics of Ductile Fracture;
- Environmental Degradation in Adhesively Bonded Structures;
- Modelling of Deformation and Failure of Polymers: Why is Bridging of Length and Time Scales Necessary?; and
- Why Bolt It When You Can Bond It? The Gluing Evolution.
Course changes and regulations
The information on this page reflects the currently intended course structure and module details. To improve your student experience and the quality of your degree, we may review and change the material information of this course. Course changes explained.
Programme Specifications for the course are published ahead of each academic year.
Regulations governing this course can be found on our website.
